BMI-41 biological inverted microscope

BMI-41

Ergonomic design, tilting binocular head, interpupillary distance 50-75mm, 360°rota table. So users can easily have a understand of the viewing height.

One module casting stable mechanical main body made of high quality aluminum alloy, guarantee the high image quality, main body surface pain is with dusting technique, anti-corrosive and anti-abrasion, perfect for human body temperature, each accessory is with optical coating with hard surface, even in bad condition, this microscope can also be used for a long time.

Safe and high efficiency LED illumination

With CREE 5W high power LED light, no need to use filter, offer natural light light stable, safe, not easy to heat, environmentally friendly, long life time.

Users can realize different cell cultivation methods.

Simple, stable and smart main body makes users more space to install all kinds of accessories, such as  petri dish, culture bottle,perforated plate, and stage can be equipped with moving scale, users can move the sample by turning the XY coaxial knob.

22mm plan high eyepoint eyepiece

20X phase contrast objective as standard accessory

With PH slide makes live cell and un-dyed cell better image.

New intelligent ECO system, economic environmentally friendly infrared induction system. When users is out for a certain time or back after a while, this system will shut down or restart automatically, save energy.

Marking objective

When you are carrying on live cell observation, you can use the marking objective to mark your sample, easy for you to check the same area and also the cell extraction.

.NewBridge Engineering Ltd. also offer you all kinds of camera, CCD, CMOS, HDMI, WIFI…..and professional microscope software, easy for you daily work.

Item BMI-41
Frame One-piece construction from arm to base,with flourescence excitation interface
UCIS Infinity Independent Achromatic Optical Design
With digital camera joint on the left side
Co-axial coarse and fine focusing knob,precision:0.001mm
Wide voltage:100∽240V,47/63Hz
Seidentopf

Observation Tube

Trnocular Tube, Interpupillary distance

50-75mm,45°inclined,diopter adjustable.

Split ratio: 50:50

Eyepiece WF10X/22 (reticle optional) ●●
WF15X/16 (reticle optional) ○○
Infinity Plan

Objectives

4X,10X,20X,40X,60X
Infinity Phase

Contrast Plan

Objectives

4X,10X,20X,40X
Infinity Plan

Florescent

Objectives

4X,10X,20X,40X,60X
Infinity Semi-apo

Plan Florescent

Phase contract

Objectives

20X,40X
Fixed Stage Size: 215(W)×250(L)mm

Could mount the Stage extension board and attachable mechanical stage.

Size of stage extension board: 120(W)×80(L)mm

 ●
attachable

mechanical stage

Work distance: 120(X)×80(Y)mm,

Low coaxial focus adjustor, attached with Petri dish holder.

 ○
Illumination Adopt 90-240V wide voltage, the 6V/30W Halogen bulb;

center presetting, adjustable brightness.

 ●
Condenser Super long work distance condenser, numerical aperture 0.3,

and work distance 72mm, movable.

 ●
Cmount 0.35X,0.5X,0.65X,1X C-mount, focus adjustable  ○
Accessory Temperature color change filter, green contrast filter, infrared

illimination filter dia45mm, attenuation filter ND25/ND50, PH slide

 ○
Operating

environment

● Use indoors

● The highest height above sea level: 2000m

● Temperature: 5℃~40℃ (41ºF~109ºF)● Maximum relative humidity: 80% when the temperature up to 31℃ (88ºF),

then it will down as linear. 34℃ (93ºF) vs. 70%, 37℃ (99ºF) vs. 60%, 40℃ (104ºF) vs.50%.

● Pollution: 2 (See IEC664)